Search


Advanced Search
Nenad Bach - Editor in Chief

Sponsored Ads
 »  Home  »  Business  »  (E) Crosco Provides Onshore Drilling
(E) Crosco Provides Onshore Drilling
By Nenad N. Bach | Published  01/16/2004 | Business | Unrated
(E) Crosco Provides Onshore Drilling


Crosco Provides Onshore Drilling Services in Libya
Tuesday January 13, 9:22 am ET


ZAGREB, CROATIA, Jan. 13 /PRNewswire/ - Crosco Integrated Drilling & Well Services Co., Ltd. and Arab Drilling and Workover Company (ADWOC) are pleased to be providing drilling services for Agip Oil in Libya. Services are currently being provided on well Pad FA6, Elephant Field, onshore Murzuq Basin with the Crosco 2000 HP drilling rig EMSCO 604 (EMSCO CII).
ADVERTISEMENT

Due to project requirements of drilling 8 wells per drilling pad a rig skidding system was designed and installed onto Crosco's drilling rig EMSCO 604. Crosco's Engineering and Machinery Manager, Branko Franolic, explained: "The skidding system moves the entire mast and substructure in vertical position including pipe setback and shaker tank with three shakers. A four-cylinder diesel unit powers the skidding system. In the first skidding the rig was successfully moved 6 meters in 38 minutes."

Crosco is an integrated onshore and offshore drilling and well services contractor. The company has a fleet of 51 modern drilling, workover and geoservice rigs as well as one semisubmersible and one jackup. Crosco is also 50% owner of Noble Crosco Drilling Ltd., which is the operator and owner of a jackup rig. In addition, with state-of-the-art western equipment, Crosco provides the following services: Well Testing, Coil Tubing, Nitrogen, Cementing, Stimulation, Logging, Mud (Drilling Fluid), Coring, Fishing and Directional Drilling.

Crosco has been providing services internationally since 1958 and has provided services in 25 countries for some of the world's most recognized oil companies. The company has ISO 9001, ISO 14001 and OHSAS 18001 certification from Bureau Veritas Quality International London and is a member of the International Association of Drilling Contractors and the International Well Control Forum. Crosco has an average annual revenue surpassing US$ 170 million.The company's headquarters are located in Zagreb,Croatia.


Source: Crosco Integrated Drilling & Well Services Co., Ltd.

How would you rate the quality of this article?

Verification:
Enter the security code shown below:
imgRegenerate Image


Add comment
Comments
  • Comment #1 (Posted by Charles Yu)

    Dear Sir,

    We, Qingdao Hongbo Petroleum Machinery Co., Ltd. are a manufacturer of mud pump and expendables of mud pump in oil drilling fields. We hope we can have a sincere cooperation with your good company as a supplier of your good company. We are sure that our products with high quality & competitive prices will lead your company to having a large margin in future bids & lowering your costs very much. Please read our company profile as following:
    Qingdao Hongbo Petroleum Machinery Co., Ltd. (HB) specializes in manufacturing and developingmud pump fluid end expendables for customers worldwide. HB’s products have equivalent qualitywith those of OEM and are produced for direct replacement for brand mud pumps including but not limited to Emsco, Gardner-Denver, National,Oilwell, Ideco, Skytop/Brewster, OPI, Wirth, Wilson, and Gaso. With a large range of specifications, HB’s high quality products have successfully proven themselves under various drilling conditions such as extreme pressure, high temperature and corrosive environments, andhave been accepted domestically and internationally.
    As one of HB’s business principals, we treat product quality as our first priority. Our employees are well trained and have more than ten years of experience in manufacturing fluid-end fittings for mud pumps. We control the product quality by strictly follow the standard of API-7K. HB’s established Quality Control System and experienced expertise ensurethe best product quality and service.
    To meet the needs of our customers, HB dedicates its precious resources to research and development. HB’s products include the following:
    Hy-chrome Mud Pump Liner (Double-metal liner); Chrome-plated Liner (Single-metal liner); Hardened Steel Liner (Single-metal liner); 3/4-web Valve and Seat; Full-open Valve and Seat (KQ/G2/FO); Valve Spring; Long-life Bonded Piston with Rubbers and Fabric;Long-life Bonded Piston with Urethane; Replacement Piston; Piston Hub; Piston Rod; Plate; Snap Ring; Crosshead; Upper and Lower Crosshead; Guide; Extension Rod; Piston Rod Clamp; Threaded Ring; Liner End Cover; Valve Pot Cover; Valve Guide; Cylinder Head; Cylinder Head Plug; Cap; Liner Seal; Valve Cover Gasket; Cylinder Head Gasket; Module (Fluid ends); Ceramic Liner, Rotary Table, Swivel, Hook, Well Head Equipment, drill pipe, drill casing, traveling blooks,F-500/800/1000/1300, PZ-9, 3NB-500/8001000/1300, 12-P-160, W-440 mud pump and 3/5 plunger pumps which are made in China, etc..
    HB commits to serve its customers on an ex-stock basis by providing high quality products and best services across the world. HB has expanded its customer base to South & North America, Europe, Middle East, Africa, Middle Asia, and Southeast Asia areas. HB welcomes business opportunities worldwide and looks forward to working with you in the future.

    Yours kindly response will be highly appreciated.

    B.rgds.
    Charles Yu
    ______________________________________

    Charles Yu
    Qingdao Hongbo Petroleum Machinery Co., Ltd.
    Qingdao Oilrig Trade Co., Ltd.
    Postal Address: FL. 4 Office Building, No.4 Duchang Road, Sifang District
    Qingdao, Shandong Province
    China
    Postal Code: 266032
    Tel: 86-532-84860018
    Fax: 86-532-84896021
    M.P.: 86-13805327589
    E-mail: sales@drillingpart.com
    yupole@hotmail.com
    yupole@263.net
    Page: www.drillingpart.com
    www.oilrigservices.com

     
  • Comment #2 (Posted by Charles Yu)

    Dear Sir,
    Qingdao Hongbo Petroleum Machinery Co., Ltd. (HB) specializes in manufacturing and developing mud pump fluid end expendables for customers worldwide. HB’s products have equivalent quality with those of OEM and are produced for direct replacement for brand mud pumps including but not limited to EMSCO, Gardner-Denver, National, Oilwell, IDECO, Skytop Brewster, OPI, Wirth and Wilson. With a large range of specifications, HB’s high quality products have been successfully proven themselves under various drilling conditions such as extreme pressure, high temperature and corrosive environments, and have been accepted domestically and internationally.

    As one of HB’s business principals, we treat product quality as our first priority. Our employees are well trained and have more than ten years of experience in manufacturing fluid-end fittings for mud pumps. We control the product quality by strictly follow the standard of API-7K. HB’s established Quality Control System and experienced expertise ensure the best product quality and service.

    To meet the needs of our customers, HB dedicates its precious resources to research and development. HB’s products include the following:

    Hy-chrome Mud Pump Liner (Bimetal liner); Chrome-plated Liner (Single-metal liner); Hardened Steel Liner (Single-metal liner); 3-web or 4-web Valve and Seat; Full-open Valve and Seat (KQ/G2/FO); Valve Spring; Long-life Bonded Piston with Rubbers and

    Fabric Long-life Bonded Piston with Urethane; Replacement Piston; Piston Hub; Piston Rod; Plate; Snap Ring; Upper and Lower valve Guide; Extension Rod; Piston Rod Clamp; Threaded Ring; Liner End Cover; Valve Pot Cover; Cylinder Head; Cylinder Head Plug; Cap; Liner Seal; Valve Cover Gasket; Cylinder Head Gasket; Module (Fluid ends); Ceramic Liner, etc..

    HB commits to serve its customers on an ex-stock basis by providing high quality products and best services across the world. HB has expanded its customer base to South & North America, Europe, Middle East, Africa, Middle Asia, and Southeast Asia areas. HB welcomes business opportunities worldwide and looks forward to working with you in the future.

    API Application Approved Notification as attached.

    Look forward to your good reply.


    Charles Yu
    Qingdao Hongbo Petroleum Machinery Co., Ltd.
    Postal Address: 4th FL. Office Building, No.4 Duchang Road, Sifang District
    Qingdao, Shandong Province
    China
    Postal Code: 266032
    Tel: 86-532-84860018
    Fax: 86-532-84896021
    M.P.: 86-13805327589
    E-mail: sales@drillingpart.com
    Mud Pump and parts manufacturing with our Page: www.drillingpart.com/product
     
  • Comment #3 (Posted by Mr.Isacc)

    Dear Sir,

    This is Isacc of China Qingdao HNA Oilfield Machinery Co., Ltd. We are a large drilling tools, mud pump and Fluid End Expendables and mud pump spare parts manufacturer in China.

    Mud Pump: We make F-500,F-800,F-1000,F-1300,F-1600, PZ-9 mud pumps.

    Our plants are specialized in producing wide range of replacement parts and liners, Pistons, Valve and seats for brand name mud pumps, including Emsco, National, Ideco, Gardner Denver, Oillwell, OPI Skytop, etc. and other brand liners. All items are manufactured to API 7K quality standards.etc.

    And we make cranskshaft, pinion shaft, crosshead assy for EMSCO F series mud pumps, GARDNER DENVER PZ-9, NATIONAL OILWELL 9-P-100, 10-P130 and 12-P-160 mud pumps.

    Every liners service life of ours more than 1000 hours. And our liners service life can reach 1243 hours which approved by our Canadian customer.

    Our F1000 mud pumps have good market in Canada, Mexico, Thailand and Middle East. And our mud pumps have approved by mud pump and insurance industry in Canada.

    The main products are sold to USA, Mid Asia,Canada, Mexico, Middle east, & Russia.

    1.We can save your time. As a manufacturer in China, compare with trading company, we can send our products to you deractly. And we have absolute advantage of production capacity, we can offer our products in short delivery time.

    2. We can save your cost. Because Base on the advantage of China land & human resource cost, via advanced technology being introduced into and absorbed, we improve our manufacturing level and product quality. Parts of products with its high cost performance are stepping in instead of same products from overseas companies.
    If you have enquiry about HNA equipment , please feel free to email us or call us, you will get the best answers in the first time from us.

    Best regards!
    Mr. Isacc
    Sales Manager
    Qingdao HNA Oilfield Machinery Co., Ltd.
    Tel:86-13583235239
    Fax;86-532-82599806
    MSN:hna-isacc@hotmail.com
    e-mail:isacc_mudpump@yahoo.com.cn
    http://www.pumpparts.cn


     
  • Comment #4 (Posted by Mr.Isacc)

    We specialize in triplex mud pumps and triplex mud pump parts and accessories. If need a quality triplex mud pump or accessory at competitive prices, contact us.

    Our plants are specialized in producing wide range of replacement parts and liners for brand name mud pumps, including Emsco, National, Ideco, Gardner Denver, etc. and other brand liners.
    All items are manufactured to API 7K quality standards. Parts are available for these popular pump models:
    Emsco:F-1300, F-1600, FB1300, FB1600, F-800, F-1000, F-500, F-350, DB-550, DA-700, FA-1600/1300, FC-2200, D-300/500, D-375, D-700,
    Ideco: T-500, T-800, T-1000, T-1300, T-1600,
    National: 7P50, 8P80, 9P100, 10P130, 12P160, N1300, C-250, K-700, 14-P-220, E-700/G-1000, K-500, K-380, K-500A/700A, C-250/350, JWS-400,
    Gardner Denver: PZ7, PZ8/9, PZ10/11, FK-FXK, FY-FXD, FD-FXX, FG-GXG, FG-FXG, KG-KXG, FQ-FXQ, FF-FXF,FF-FXP,
    Oilwell: A-560/600-PT, A-850-PT/A-1100-PT, A-1700-PT/A-1400-PT

    And other brand spare parts for WIRTH, OPI, Ellis Williams, Wilson, Gaso, Skytop/Brewster.

    If you have enquiry about HNA equipment , please feel free to email us or call us, you will get the best answers in the first time from us.

    Best regards!
    Mr. Isacc
    Sales Manager
    Qingdao HNA Oilfield Machinery Co., Ltd.
    Tel:86-13583235239
    Fax;86-532-82599806
    MSN:hna-isacc@hotmail.com
    e-mail:isacc_mudpump@yahoo.com.cn
    http://www.pumpparts.cn


     
  • Comment #5 (Posted by Mr.Isacc Xu)

    Our plants are specialized in producing wide range of replacement parts and liners for brand name mud pumps, including Emsco, National, Ideco, Gardner Denver, etc. and other brand liners.
    All items are manufactured to API 7K quality standards. Parts are available for these popular pump models:
    Emsco:F-1300, F-1600, FB1300, FB1600, F-800, F-1000, F-500, F-350, DB-550, DA-700, FA-1600/1300, FC-2200, D-300/500, D-375, D-700,
    Ideco: T-500, T-800, T-1000, T-1300, T-1600,
    National: 7P50, 8P80, 9P100, 10P130, 12P160, N1300, C-250, K-700, 14-P-220, E-700/G-1000, K-500, K-380, K-500A/700A, C-250/350, JWS-400,
    Gardner Denver: PZ7, PZ8/9, PZ10/11, FK-FXK, FY-FXD, FD-FXX, FG-GXG, FG-FXG, KG-KXG, FQ-FXQ, FF-FXF,FF-FXP,
    Oilwell: A-560/600-PT, A-850-PT/A-1100-PT, A-1700-PT/A-1400-PT

    And other brand spare parts for WIRTH, OPI, Ellis Williams, Wilson, Gaso, Skytop/Brewster.

    If you have enquiry about HNA equipment , please feel free to email us or call us, you will get the best answers in the first time from us.

    Best regards!
    Mr. Isacc
    Sales Manager
    Qingdao HNA Oilfield Machinery Co., Ltd.
    Tel:86-13583235239
    Fax;86-532-82599806
    MSN:hna-isacc@hotmail.com
    e-mail:isacc_mudpump@yahoo.com.cn
    http://www.pumpparts.cn

     
  • Comment #6 (Posted by Fred)

    Dear Sir,
    We, Dezhou Jiatong Machinery Co., Ltd. are a manufacturer of mud pump and expendables of mud pump in oil drilling fields. We hope we can have a sincere cooperation with your good company as a supplier of your good company. We are sure that our products with high quality & competitive prices will lead your company to having a large margin in future bids & lowering your costs very much. Please read our company profile as following:
    Dezhou Jiatong Machinery Co., Ltd. (JT) specializes in manufacturing and developing mud pump fluid end expendables for customers worldwide. JT’s products have equivalent qualitywith those of OEM and are produced for direct replacement for brand mud pumps including but not limited to Emsco, Gardner-Denver, National,Oilwell, Ideco, Skytop/Brewster, OPI, Wirth, Wilson, and Gaso. With a large range of specifications, JT’s high quality products have successfully proven themselves under various drilling conditions such as extreme pressure, high temperature and corrosive environments, and have been accepted domestically and internationally.
    As one of JT’s business principals, we treat product quality as our first priority. Our employees are well trained and have more than ten years of experience in manufacturing fluid-end fittings for mud pumps. We control the product quality by strictly follow the standard of API-7K. JT’s established Quality Control System and experienced expertise ensure the best product quality and service.
    To meet the needs of our customers, JT dedicates its precious resources to research and development. JT’s products include the following:
    Hy-chrome Mud Pump Liner (Double-metal liner); Chrome-plated Liner (Single-metal liner); Hardened Steel Liner (Single-metal liner); 3/4-web Valve and Seat; Full-open Valve and Seat (KQ/G2/FO); Valve Spring; Long-life Bonded Piston with Rubbers and Fabric;Long-life Bonded Piston with Urethane; Replacement Piston; Piston Hub; Piston Rod; Plate; Snap Ring; Crosshead; Upper and Lower Crosshead; Guide; Extension Rod; Piston Rod Clamp; Threaded Ring; Liner End Cover; Valve Pot Cover; Valve Guide; Cylinder Head; Cylinder Head Plug; Cap; Liner Seal; Valve Cover Gasket; Cylinder Head Gasket; Module (Fluid ends); Ceramic Liner, Rotary Table, Swivel, Hook, Well Head Equipment, drill pipe, drill casing, traveling blooks,F-500/800/1000/1300, PZ-9, 3NB-500/8001000/1300, 12-P-160, W-440 mud pump and 3/5 plunger pumps which are made in China, etc..
    JT commits to serve its customers on an ex-stock basis by providing high quality products and best services across the world. JT has expanded its customer base to South & North America, Europe, Middle East, Africa, Middle Asia, and Southeast Asia areas. JT welcomes business opportunities worldwide and looks forward to working with you in the future.

    Yours kindly response will be highly appreciated.

    B.rgds.
    Fred Zhao
    ______________________________________
    Postal Address: No.2339 DongFangHong Road, Dezhou Economic Development Zone, Dezhou City, Shandong Province. China Postal Code: 253000
    Tel: 0086-534-2562266 Fax:0086-534-2322289
    M.P.: 0086-13562480776 E-mail: jiatongjingying@yahoo.com.cn

     
  • Comment #7 (Posted by Frank Tsou)

    Our company is one of the leading designers and manufacturers of triplex mud pumps and fluid end expendables of oilfield drilling machinery, offering top quality and competitive products for our clients all over the world. We adopt ISO9001 quality system and our products meet the API standard.
    We have been engaged in manufacturing series of quality mud pumps and spare parts for oilfield machinery since early 1990s. The main products are sold to USA, Mid-Asia, Canada, Mexico, Middle East and Russia. The mud pumps are used in oil drilling and mining. We can supply series of mud pumps( like f-500, f-800, f-1000, f-1300, f-1600 and PZ series )and a full line of fluid end expendables for popular mud pumps in the world, including continental Emsco, National, Gardener Denver,Oilwell,Ideco,Wheatly,Wilson,Wirth,OPI,EllisWillianms,Skytop/Brewster, etc.
    We currently manufacture over 2000 major products such as valves & seats, modules, gaskets, plates, crosshead and crosshead guide, hydraulic seat puller, snap rings & valve rings, hy-chrome liners, chrome-plated liners, hardened steel liner, piston hubs, piston & piston rubbers, piston rods and extension rods, cylinder heads & valve covers, drilling tools and other expendables. In fact, as a leading oilfield machinery company, we have revolutionized the triplex premium chromium liners and our patent hp liners have dominated the market with Chinese patent no.: zl03269409.1 since late 1990s. We guarantee that our parts are completely interchangeable with those offered by OEMs with no modification of existing equipment. The warranty extended by Hainuoao(HNA) meets or exceeds the warranties offered by the OEMs.
    As one of the leading manufacturers, with 150,000 square feet manufacturing area, our mission is to supply drilling contractors quality products at competitive prices with responsive services.

    Address: 39#, xinghe rd, industrial zone, lancun town, jimo, qingdao, shandong province, china
    Fax: 0532-82599806 0532-82599926
    Contact: Frank
    MSN: frank_hna@hotmail.com
    frank_mudpump@yahoo.com
    Phone : 8615964963969

     
  • Comment #8 (Posted by Fred)

    Dear sir,
    We, Dezhou Jiatong Machinery Co., Ltd. are a manufacturer of mud pump and expendables of mud pump in oil drilling fields. We hope we can have a sincere cooperation with your good company as a supplier of your good company. We are sure that our products with high quality & competitive prices will lead your company to having a large margin in future bids & lowering your costs very much. Please read our company profile as following:
    Dezhou Jiatong Machinery Co., Ltd. (JT) specializes in manufacturing and developing mud pump fluid end expendables for customers worldwide. JT’s products have equivalent qualitywith those of OEM and are produced for direct replacement for brand mud pumps including but not limited to Emsco, Gardner-Denver, National,Oilwell, Ideco, Skytop/Brewster, OPI, Wirth, Wilson, and Gaso. With a large range of specifications, JT’s high quality products have successfully proven themselves under various drilling conditions such as extreme pressure, high temperature and corrosive environments, and have been accepted domestically and internationally.
    As one of JT’s business principals, we treat product quality as our first priority. Our employees are well trained and have more than ten years of experience in manufacturing fluid-end fittings for mud pumps. We control the product quality by strictly follow the standard of API-7K. JT’s established Quality Control System and experienced expertise ensure the best product quality and service.
    To meet the needs of our customers, JT dedicates its precious resources to research and development. JT’s products include the following:
    Hy-chrome Mud Pump Liner (Double-metal liner); Chrome-plated Liner (Single-metal liner); Hardened Steel Liner (Single-metal liner); 3/4-web Valve and Seat; Full-open Valve and Seat (KQ/G2/FO); Valve Spring; Long-life Bonded Piston with Rubbers and Fabric;Long-life Bonded Piston with Urethane; Replacement Piston; Piston Hub; Piston Rod; Plate; Snap Ring; Crosshead; Upper and Lower Crosshead; Guide; Extension Rod; Piston Rod Clamp; Threaded Ring; Liner End Cover; Valve Pot Cover; Valve Guide; Cylinder Head; Cylinder Head Plug; Cap; Liner Seal; Valve Cover Gasket; Cylinder Head Gasket; Module (Fluid ends); Ceramic Liner, Rotary Table, Swivel, Hook, Well Head Equipment, drill pipe, drill casing, traveling blooks,F-500/800/1000/1300, PZ-9, 3NB-500/8001000/1300, 12-P-160, W-440 mud pump and 3/5 plunger pumps which are made in China, etc..
    JT commits to serve its customers on an ex-stock basis by providing high quality products and best services across the world. JT has expanded its customer base to South & North America, Europe, Middle East, Africa, Middle Asia, and Southeast Asia areas. JT welcomes business opportunities worldwide and looks forward to working with you in the future.

    Yours kindly response will be highly appreciated.

    B.rgds.
    Fred Zhao
    ______________________________________
    Postal Address: No.2339 DongFangHong Road, Dezhou Economic Development Zone, Dezhou City, Shandong Province. China Postal Code: 253000
    Tel: 0086-534-2562266 Fax:0086-534-2322289
    M.P.: 0086-13562480776
    E-mail: jiatongjingying@yahoo.com.cn

     
  • Comment #9 (Posted by Fred)

    Dear sir,

    We,Dezhou Jiatong Machinery Co., Ltd have been engaged in manufacturing and dealing in mud pump and related fittings in oil drilling fields ---------High frequency quenching liners and modules and so on. Most of our products are exported, and we have the power of self-supporting import and export.Our company’ s products design is fit for worldwide brand mud pumps, such as: Emsco, Gardner-Denver, National, Oilwell, Ideco, Skytop/Brewster, OPI, Wirth, Wilson, Gaso and so on. Our company owns lots of large-scale advanced equipment. Both Liners’ quenching technique and heat treatment technique are in the leading place in China. Every year we produce and sell about 10000 liners of various kinds in different sizes . Products meet the criteria and rule of API totally. Part of our products are produced directly for mud pump producers who are famous worldwide. The product is widely approved by the user communities in American, Canadian, Mexican, the Middle East, the Australian market for its fine quality and the best service。Our company mainly produces and sells the following products:
    Liner lines: Single-metal liners(High Frequency Quenching Liners, Chromium-plated Liners), Double-metal Liners, Ceramic Liners.
    Pistons and Piston Parts: Pistons with Replacement Rubbers, Bonded Urethane Pistons, Piston Hubs, Piston Rubbers, Snap Rings, Piston Rods, Clamps.
    Valves and Seats: Stem-guided Valves, Three-arm Seats, Cross-arms Seats, Three-wing Valves, Four-wing Valves, Full Open Seats, Springs.
    Modules and Module Parts: various Modules, Modules Assembly, Modules Parts.
    Also, we produce custom-made valves, seats, liners and other mud pump parts. Customs can choose needed products by yourselves, and we can help you choose suitable products if you provide us with mud pump models and practical drilling conditions in detail. We have specialists of our products serve for the customer track. What’ more, we may defer to the blueprint or the sample customers provide and carry on processing. Jiatong’ s staff whole-heartedly welcome customers everywhere to exchange cooperation with us.


    Fred Zhao

    Marketing Director

    Tel: 0086-534-2562266

    Fax:0086-534-2322289
    M.P.: 0086-13562480776

    E-mail: jiatongjingying@yahoo.com.cn

    Dezhou Jiatong Machinery Co.,Ltd
    Postal Address: No.2339 DongFangHong Road, Dezhou Economic Development Zone, Dezhou City, Shandong Province. China Postal Code: 253000


     
  • Comment #10 (Posted by Jack John)

    Dear N.N.Bach,

    I am glad to write this mail to you.



    I got information from internet that you deal in oilfield wear parts in oilfield service market. Hereby I am honored to introduce HC Fine Ceramic Co., LTD to you.



    Zibo Huachuang Fine Ceramics Co., Ltd.- is a new & hi-tech ceramic enterprise that specializes in manufacturing of ceramic sleeves and pistons of mud/oil pump with the excellent performances, such as wearing-resistance, erosion-resistance, high-temperature-resistance, high-strength, high-hardness in the working conditions on which metal and polymer ones can not do. They are widely used in MUD PUMP in the fields of petroleum, such as NATIONAL, OILWELL, IDECO, EMSCO, GARDNER-DENVER,FMC etc.




    More information please visit: http://www.hcfc.diytrade.com and http://www.huachuangfc.com



    Attached files are pictures of liners for your reference.



    If any problem, please contact with me freely. Waiting for your further news asap.



    TKS



    Jack John

    Mobile: 0086 15092323610 TEL 0086 0533 3582575 FAX 0086 0533 3582026

    SKYPE asianren MSN jackjhon2061107@hotmail.com

    Zibo Huachuang Fine Ceramic Co., Ltd

    No 55 Lutai Road, Zibo City

    Shandong Province, P.R.C.

    255086

    : )


     
  • Comment #11 (Posted by George)

    Dear Sirs,

    It's our great honor and pleasure to know you and we're writing you for our possible partnership.

    Our Company (Kerui Petroleum Equipment Co., Ltd) specializes in manufacturing and supplying various kinds of API and ISO certified drilling/workover rigs including mobile drilling/workover rigs, skid-mounted land drilling rig.Our drilling rigs can drill depth from 3,280 ft to 30,000 ft. We can also manufacture and supply API certified tubulars such as DP, DC, casings, tubings etc.

    If you want to learn more about us, please feel free to visit our website: www.keruigroup.com

    We have already exported many rigs to the world.As to Europe market,our two rigs are working there now, one (1) set of 550HP mobile workover rig for LOTUS PETROL Romania, one(1) set of 750HP moible workover rig for ASCOM GROUP Romania. Meanwhile, we will supply one(1) complete pacjage of 3000HP drilling rig to KCA Deutage the end of 2009. More References about our company will be provided if needed.

    Any other questions , please feel free to contact us.

    Thanks for your kind attention and hoping to hearing from you soon.

    Best Regards,

    George
    Sales Manager
    -------------------------------------------
    Shandong Kerui Petroleum Equipment Co., Ltd
    Add: NO.233, Nan'er Road, Dongying , Shandong, China257067
    TEL:86-546-8179683
    FAX:86-546-8179681
    Mobile:86-15954618519
    Email: liukai@keruigroup.com
    Http://www.keruigroup.com
    Focused,Devoted, Full-hearted, All for clients

     
  • Comment #12 (Posted by MISS JESSIE)

    HNA is a large drilling tools, mud pump and Fluid End Expendables and mud pump spare parts manufacturer in China.
    HNA is a comprehensive machinery manufacturer, whose products cover petroleum machinery & equipment, drilling & production tools and accessories. It has sound manufacturing facilities, advanced technology, perfect measuring and testing devices.
    HNA is specialized in producing mud pumps and wide range of replacement parts and liners for brand name mud pumps, including Emsco, National, Ideco, Gardner Denver, etc. and other brand liners. All items are manufactured to API 7K quality standards.
    HNA is making progress and development in the new era. We would like to cooperate with friends of the world for success.
    Our Products are designed to fit mud pumps of Emsco, Gardner- Denver, National, Oilwell, Ideco, Skytop/Brewester, as well as OPI, Wirth, Wilson and Gaso. Our products include Liners: Hy- chrome Mud Pump Liner, chrome-plated Liner, Hardened Steel Liner Valve and seat: Premium Cross Arms Valve and seat, Full open Valve and seat, Valve Spring Piston and piston rods; Long-life Bonded Piston with Rubber and Fabric, Long-Life bonded Piston with Urethane, Replacement Piston, Piston Hub, Piston Rod, Plate, Snap Ring Other parts: Crosshead, Upper and Lower Crosshead Guide, Extension Rod, Piston Rod Clamp, Threaded Ring, Linder End Cover, Valve Pot Cover, Valve Guide, Cylinder Head, Cylinder Head Plug, Cap, Linder Seal, Valve Cover Gasket, Cylinder Head Gasket and etc. Mud pumps: We can offer the F-650,F-800,F-1000,F-1300,F-1600 and PZ-9 mud pump.
     
  • Comment #13 (Posted by Harry)

    Dear Sir or Madam,



    We're Dezhou Rundong Petroleum Machinery Co., Ltd., specializing in mud pump, fluid end. Our products mainly include valve seat and body, valve assembly, liners, piston, piston rod and other mud pump parts.



    Our products have already gained ISO9001 quality management standard certificate and meet API standard requirements.



    Basing on our development tenet of Quality First, Credit Uppermost, we always put our utmost efforts to supplying high quality products and best services to clients with maximum saving cost for our equipments users.



    If you have any need, please do not hesitate to contact us. We are looking forward to establishing long business relationship with you.



    Best Regards



    Harry



    Dezhou Runtong Petroleum Machinery Co., Ltd.

    Add: No.1192 Xinhu Street, Dezhou City, Shandong, China

    TEL: 0086-534-2600280

    FAX: 0086-534-2621898

    Website: Http://rtpumpparts.com

    Email: rdsale04@gmail.com

    rdsale04@yahoo.cn

    Msn: rdsale04@hotmail.com

    Skype: rdsale04


     
Submit Comment


Article Options
Croatian Constellation



Popular Articles
  1. Dr. Andrija Puharich: parapsychologist, medical researcher, and inventor
  2. (E) Croatian Book Club-Mike Celizic
  3. Europe 2007: Zagreb the Continent's new star
  4. (E) 100 Years Old Hotel Therapia reopens in Crikvenica
  5. Nenad Bach singing without his hat in 1978 in Croatia's capital Zagreb
No popular articles found.